Chassis loom for Solway Trailfeeder

Chassis loom for Solway Trailfeeder.  This loom is a replacement wiring loom from the motor to the tow hitch, that runs down the internal box section of the chassis.

FITTING: The 7 pin plug is supplied unconnected, to facilitate threading the cable down the chassis. The loom is easiest to fit through the hopper, out of the grommet and then through the centre of the chassis box section. Ft the 7 pin plug following the diagram included.

For the loom with handle bar switch please see product AM0003 Trailfeeder loom.