Tube anchors are designed to securely fasten snares into the ground. On firm ground, they can be much more effective than traditional pegs or stakes, and once correctly installed they are very difficult to pull out. Our tube anchors are made from cut steel, and an18" length of 2mm wire cable can be included if you wish. This cable is fitted with a ferruled loop so that it is possible to attach snares using d-shackles. The anchors can be supplied without wire so that you can fit cable to your own specifications. To use, place the anchor on the driver for tube anchors, then drive it into the soil as deep as you wish. Remove the driver leaving the anchor in the ground. Once the snare is pulled tight, the anchor will pivot underground and lodge itself firmly into the soil. The harder it is pulled, the more firmly wedged it will become. The tube anchor can be re-used. Simply hold on to the end of the wire and drive a spade down along its length, working the soil loose. With a certain amount of digging, the anchor will come away, ready for re-use. the shape of the tube anchor makes it ideal for use on hard to moderate ground. In some situations, it will not be suitable for use on wet or peaty soils.
Product code: 1920
DUE TO THE CURRENT HEALTH CRISIS DELIVERIES WILL TAKE LONGER THAN USUAL. WE ARE OPERATING WITH SKELETON STAFF AND COURIERS HAVE BEEN ASKED TO CONCENTRATE ON DELIVERING ESSENTIAL SUPPLIES.