Designed by Solway Feeders Manufactured in the UK

Please allow 3 weeks for delivery .                  Does not include ATV vehicle !!!

Features our new high output, high torque UK designed and built 12vdc motor and heavy duty wiring loom.

The new model comes with an updated wiring loom and handle bar switch allowing you to select continuous feeding or pulse feeding for periods of up to 10 seconds. The Solway mobile feeder scatters feed from your atv or quad bike along the length of each feed ride and by planning your entire feed route carefully, you will not only save yourself time, but you will also see your birds become wilder with less wandering, leading to a better spread over the guns.

Use cleaned and seived feed only, stones and foreign matter will damage your feeder and void your warrenty.  Do not use liquid based attractants as this will block the feed outlet. Powder attractants such as Solway GameMaster Spice and Birdpuller can be used.

The unit has quick release fasteners and does not restrict the addition of a trailer. The hopper is moulded from strong polyethylene with a recommended maximum capacity of 60kg. The lid is designed to be easily tilted, and has an internal bungee and cord retainer, and the spinner has raised rolled edges to prevent spillage. The feeder scatters food in a fourteen foot spread, and although the flow rate is fixed, the feed rate can be controlled by a pushed button on the handlebars. The powerful 12vdc motor runs on the vehicle's battery, a wiring loom and plugs are provided to fit most agricultural quad bikes. If you are fitting to a non standard vehicle we can make a custom loom at additional cost. Connection must be made to a fused supply 15 amp fuse rating.  The feed rate is set based on using clean dry wheat. When feeding pellets or a mixture of pellets and wheat the feed rate will be reduced and you may need to "spin" for a longer time. It is not recommended for larger kernal such as whole maize of large sunflower seeds or the like, but we can supply a modified version for these large feeds at extra cost, please contact our sales or technical department for more information.

The hopper is attached to the ATV with sturdy aluminium brackets, and can be unclipped and removed in less than thirty seconds.

Important when ordering this item, please specify the make and model of the atv that you plan to use it with, as well as the measurements of the back rack. The back rack of your atv must be made of round tubular steel, the feeder cannot be fixed to the cheaper plastic racks for safety reasons. The back rack must also be parralel sided not tapered or shaped/curved.Fits standard racks 7/8 inch (22mm) round tube 36-42 inches wide or 90 to 108 cms wide. If outside these measurements please consult our technical sales team.

Please check with your atv supplier that your particular machine is suitable to carry the extra loading on the back rack. We only recommend specifically designed agricultural machines of at least 350cc, preferably 4WD. Leisure & sports machines are not suitable, high speed is not required or desirable 10mph max when feeding on level ground. Reduce speed and load on hilly or uneven ground.     The Solway machine feeder is designed for OFF ROAD USE ONLY, if you atv is fitted with road legal lighting some adjustment might be required by your ATV Dealer

We supply a variety of spare or replacement parts for solway machines dating back to 1992

Our mobile feeders are rohs compliant.

NEW ATV front basket which is powder coated, click on this link to view. 

Approx dimensions: 36ins (914mm) wide, 20ins (508mm) deep, 22 ins (558mm) high; height 22ins (558mm) at rear, 18ins (547mm) from rack. lid: 33ins diameter. spinner: 6.25 ins (160mm)

Fitting instructions:

Fitting the new type SOLWAY loom to your ATV
Remove sufficient body panels to enable an easy route for the cable.
Ensure it fits fairly loosely with plenty of spare cable at the switch end allowing for the movement of the handlebars and controls and battery box end. The cable can be clipped or tied to the frame of the atv but make sure it is clear of any hot parts of the engine or exhaust system.
The switch is prewired and connected to the loom and only re-quires mounting on the left hand side handlebar as close to the other controls as possible.
The other end of the loom connects to the battery with the ring connectors provided. The fuse link wire connects to the Positive terminal and the plain end ring to the Negative terminal.
Connect the 7 pin Grey “S” type plug to the feeder “S” type socket and check the operation of the feeder motor. Press the top red switch into the on position. For continuous feed use the mid grey switch. For intermittent / pulse feed use the lower red push button . When not in use turn off the top red switch
Refit and secure all bodywork panels and recheck operation.

Video below not working?
Your browser may not meet the minimum requirements to view YouTube videos. Please refer to this document for more information.

Product code: 1308


Deliveries are still taking longer than pre-pandemic times. We endeavour to deliver most small items within 7 working days of receipt of your order and payment by courier such as Fedex, DPD, ParcelForce & Royal Mail. Larger and multiple orders may take longer as they are sent by road freight.  Items such as machines and built items can take much longer, please see details in the product description.      If you are not going to be present at the delivery address please state a safe place to leave your package.                                                                                  


Request more info

Got questions?