Manufactured in the UK

This unique and newly improved automatic drinker can be fitted directly to a water container and provides birds and other pets with a constant supply of water. As water is taken from the trough, the simple refill system allows more to trickle into the bowl..  Made from durable moulded plastic, this cup drinker can be used for everything from chicks to adult birds, cats, small dogs and ferrets. Manufactured in Great Britain, these maxi cup drinkers are a vastly improved redesign of our old mini cup drinkers. They work well in most weathers, but are not frost proof.                                       Approx bowl size 150mm x 100mm x 40mm deep.

Bucket is not supplied

The Maxicup is a self-filling, multi use drinker with a cup capacity of 0.5 litres. It can be fitted to water containers with a water depth of up to 180cm (72”). It is easy to fit, maintain and use.
Ideal for outside or indoor use, the Maxicup is hardwearing and suitable for mostpets, game and wild birds.

Fitting: Simply drill the water container with a 12mm (1/2”) drill at a suitable height for your birds or pets.
Fit the Maxicup by removing the nut & filter, place the Maxicup spigot through the hole leaving the washer on the outside and tighten down the nut until it forms a seal with the wall of the tank – then fit the filter behind the nut. Fill with water, check angle and retighten if necessary.

Maintenance: The Maxicup is simple to maintain, simple undo the two screws securing the cup to the filter cover, separate the two halves and then clean the float and interior of the housing then reassemble.

Product code: DR0074

DELIVERY INFORMATION

DUE TO THE CURRENT HEALTH CRISIS DELIVERIES WILL TAKE LONGER THAN USUAL. WE ARE OPERATING WITH SKELETON STAFF AND COURIERS HAVE BEEN ASKED TO CONCENTRATE ON DELIVERING ESSENTIAL SUPPLIES. 

 

Request more info

Got questions?