Electric fences provide an effective barrier to contain livestock and deter vermin, but when they reach a gateway, problems can arise. While the perimeter of the fence may be impenetrable, gates are often a weak link in your defences because it is tricky to fortify them while keeping them easily accessible. Our electric fence gateway system consists of everything you will need to stretch your electric fence across a gap of up to five and half metres, maintaining your easy access without losing any of the efficiency of a full fence. A high tension gate handle is attached to a retractable 10mm electric tape which in turn is easy to connect to one end of your electric fence. The gate handle hooks in to a gate handle insulator, which is specially designed to retain voltages and continue the circuit on the other side of the gateway. Once set up, all you will need to do to cross your electric fence is simply unhook the gate handle, pass through the gate, then hook it up behind you again. The clever design of the electric tape spool automatically rewinds the tape when it is unhooked, meaning that an effective electric fence can be dismantled and rebuilt in a matter of seconds. all the fittings required to create your electric gateway are included with this system, and users often comment on how easy it is to install and operate.
Product code: 3765
DUE TO THE CURRENT HEALTH CRISIS DELIVERIES WILL TAKE LONGER THAN USUAL. WE ARE OPERATING WITH SKELTON STAFF AND COURIERS HAVE BEEN ASKED TO CONCENTRATE ON DELIVERING ESSENTIAL SUPPLIES.